CaveVan Forum
VW T4 "Eurovans" => Interior! => Topic started by: Stonefly on June 13, 2015, 10:27:33 am
-
Opened up the plastic shroud around my ignition switch, and this fell out (the screw, not the penny). It has a #9 Torx head, and about 1/4 inch of thread on the end. I cannot see on the steering column or attached switches any likely place it came from. Any ideas?
-
I've had the dash on many of these apart and it doesn't look familiar.
-
It could be the one machine screw that holds the plastic shroud to the column bottom/middle maybe though it looks a bit long.
Justin
2000 EVW 5-spd TDI