For the snow I selected General Altimax Arctic tires in 235/70/16. They are studdable, if needed, and were relatively inexpensive, i.e. ~$90. In order to fir those, I used two lift spacers on each rear, so 1.5" and the corresponding torsion adjustment in the front. If you want to do this yourself and you like to save yourself a lot of hassle, custom tool fabrication or sore knuckles, make sure you get the torsion socket first. It's a 27mm socket that is 140mm long, so your standard deep wall socket will not do it. You can make one or GoWesty sells one for around $30.
I would post a picture, but it seems I cannot upload a .jpeg image, even though it is a .jpg image.... Might be an iPad thing.