CaveVan Forum

VW T4 "Eurovans" => Winnebago "Full Campers" => Topic started by: albertr on May 19, 2015, 02:57:23 pm

Title: Fixing broken EVC door harness
Post by: albertr on May 19, 2015, 02:57:23 pm

Did a quick write-up on fixing broken door harness. Any comments are welcome.

http://www.iral.com/~albertr/EVC/doors/brokenharness.html

-albertr

Title: Re: Fixing broken EVC door harness
Post by: mudyf0x on May 19, 2015, 03:51:51 pm

Had this problem with mine , I think the problem is that the loom is bound too tightly and does not allow the wires to flex enough, the above link to the post deals with everything but I would not bind the cable together to tighlty , possibly using a braided sleeve or sock type cover ...