CaveVan Forum
VW T4 "Eurovans" => VR6 Engine tech => Topic started by: boostin20v on June 18, 2020, 07:38:46 am
-
The OE master/slave hose and related OE part numbers appear to be NLA now. Need input on getting a hose made, or where I can buy the ends needed to make a hose.
The OE hose itself is 701721477D which looks to use the same push fit ends as 2000ish and newer Audi/VWs, see attached image. The hard line through the firewall also uses this connection (M12x1 at the master). The slave has a funky threaded connection with an extended o-ring for sealing. Need to figure out how to adapt from the hardline to a hose and from the hose to the slave's connection.
Ideas?