Just wanted to start a topic on repairing things on your van! Steps would be awesome with pics! Advice, thoughts, and wisdom!
Ill start with doing sway bar links!
Step 1: Jack vehicle up and block properly.
Step 2: Remove Wheel
Step 3: Jack lower control arm up to release tension/ pressure on link/shock bolt.
Step 4: Remove 21mm nut off of lower control arm bolt for link/shock bolt.
Step 5: Press Bolt out of lower control arm to release shock and Link.
Step 6: Spray lubricant on bushing of sway bar link to help it slide off easier, i used wd-40 and it worked great.
Step 7: This can be tricky, but pull or wiggle link off of bar. The bar has a groove where the bushing sits in, and it can be hard to get past that.
Step 8: Lubricate new link bushing and press on, no tool was needed, it slid on pretty easy with even force from your hand.
Step 9: Reinstall Bolt to lower control arm
Step 10: Slide shock onto bolt and tighten nut, cant remember the torque.. sorry
Step 11: reinstall wheel, tighten lugs and go for a ride!